Determine a suitable location to set-up The Body Charger, preferably with a pleasant view and good ventilation.
Device Set-up:
- Remove three components from packing materials
Bulb
Control Unit
Foot Unit
- Place the Control Unit near an electrical outlet with the electrical plug facing away from you
- Place the Foot Unit 1” - 3” away from the Control Unit and remove the sliding cover
- Insert the two (one prong) cords of the Foot Unit into the corresponding color plugs of the Control Unit
- Insert the (one prong) cord of the Bulb into the corresponding color plug of the Control Unit
- Insert the (3-prong) cord of the Control Unit into the unit and then plug the grounded cord into the wall
Note: We recommend plugging the Control Unit into a surge protector and then into the wall outlet.
- Place a comfortable non-metal chair, 1” - 6” from the Foot Unit, handle side
- Extend turn-on/off pull-cord within easy reach
Set-up – The Body Charger:
To Use - The Body Charger:
- Sit on a non-metal chair and place bare feet, with heels up, on the Foot Unit
NOTE: You will feel a strong static shock when in contact with metal.
- Grasp firmly with two hands the widest part of the bulb and pull the purple transformer cord to turn-on The Body Charger. When the device is on place both feet flat on the Foot Unit
- When session is complete, pull the purple transformer cord to turn-off device
NOTE: Clean after each use.
Bulb & Foot Unit:
Using a spray bottle filled with either hydrogen peroxide or rubbing alcohol; lightly spray both the Bulb & glass plate of the Foot Unit and wipe completely dry with a paper towel.
NOTE: Clean device after each use.
The Copper Plate:
Clean the copper plate when tarnished, a blue/green color.
UNPLUG the copper plate from the foot unit and place in a non-metal pan submerged in white vinegar. Soak for 15-20 minutes, remove plate, rinse and pat dry with a paper towel
Cleaning - The Body Charger:
